Automatic Water Softening Station IMT-S4
Automatic water softening station designed to be installed on the main water supply, now with a water leak detector and monitor that automatically closes the valve if even a very small water leak is suspected. The sensitivity of the device is 1-2l per hour!
Designed for the whole household
Fully automated water softening and regeneration
Flow rate up to 3.000 l/hod
Water leak detector & monitor + 1 pcs leak sensor
Can be connected to the E-Water app
For family houses, hotels, small commercial enterprises
| Category: | Water softeners |
|---|---|
| Warranty: | 2 years |
| Weight: | 49.1 kg |
The built-in computer enables monitoring and programming of the device. It monitors the remaining capacity and regenerates the softening resin. The frequency depends on the hardness of the water and its quantity. It is possible to set the time and period of the regeneration (early morning hours are set by default). The special ion exchange resin removes calcium and magnesium ions from the water, reduces their concentration in the water and thereby softens it.
Backwashing
When the ion exchange resin is saturated, it needs to be regenerated. The first step of regeneration is flushing the system. Flashing removes the mechanical impurities collected in the filter and on the surface of the resin and loosens the pressure-packed resin so that the regeneration solution can work effectively.
Regeneration
A regeneration brine (concentrated solution of salt) flows through the layers of saturated resin and thus restores its softening capabilities.
- Product parameters:
- Resin volume: 30 l
- Working pressure: 0,15-0,35 Mpa
- Flow rate: 3,0 m³/h
- Power supply: 100-240V~50/60Hz
- Inlet/Outlet Fittings: G 1"
- Flushing and regeneration: automatic
- Dimensions: 383x527x1223 mm
- Certifications: RoHS, CE
Be the first who will post an article to this item!
Be the first who will post an article to this item!
